Summer is here again. Opting for above the ground pool for summer time can be fun. You just need to select the right liner for your pool. It might seem a daunting task at first but can be absolute fun if you have all the supplies and installation material in place. With the right information, you are capable of installing an above pool liner. Replacing your own pool to a above the ground pool liner can be an easy weekend project if you measure, buy, and install your own pool liner. It can also save you lots of money as you are not hiring any outside help.
Here is a step-wise procedure of how you can make your own above pool liners.
Draining the pool
A high capacity pump can be used to drain out the water from the pool. Cut the liner from the base using a knife when almost all of the water is pumped out of the pool. There would be small amount of water that would be pooled on the base, keep pumping the water out.
Uninstall the liner
Once all the water is drained out of the pool, cut the liner into sections using a razor knife. Roll them up and toss them over the wall of the pool. For overlap liners, you will have to release the top rails before you can release the liners from the wall. Refer your own pool liner manual and look for specific instruction for this step.
Prep the floor and wall
Smooth out all the heel divots, waves, and uneven areas if you have a sand bottom under your liner. You can add new sand on the floor.
Install a new liner
Look out for the weather before installing a new liner. Warm weather is the best for installing a new liner. With temperatures ranging between 65 to 75 degree Fahrenheit, the liner would stretch more easily. Keep in mind that overlap liners and beaded liners both have different procedures for installation.
Use a vacuum pump to set the liner
Though optional, this step can be very helpful in preventing wrinkles on the new liner. Use a duct tape and a cardboard on the outside of the pool in order to seal the wall returns. Use sufficient duct tapes.
Fill the pool
Before you fill the pool, make sure that the top rails are all reassembled to its original structural design. Monitor that there no wrinkles redevelop and the floor is maintained smooth. Overlap liners should be made sure their liners are not overstretched.
It is extremely tough to master the nuances of a complex sport like golf. Beginners, in particular, can find it to be exhausting and confusing because of the multiple rules and equipment involved. While one has to work hard on their skills, with the right clubs, golfing can turn into the most rewarding experience.
The following are some common types of golf clubs newbies should know of.
Woods
These types of golf clubs were initially made of wood; however, they are now created with materials like steel or titanium. Woods are useful for propelling the golf ball to the farthest distances. The heads of such clubs are large and rounded, whereas their base is flat, which allows the player to effortlessly swing the club over the ground. Driver and fairways are the two most popular kinds of woods used.
Irons
The irons are used once the player is closer to the green, i.e., when one is within 200 yards of the hole. The iron golf set covers clubs numbered from 3 to 9 and a pitching wedge. The lower numbered irons can be a little tricky to use. Therefore, several beginners adjust their golf set by picking a few wood clubs so that they could comfortably strike the ball and at the same time cover big distances.
Wedges
The pitching wedge is incorporated in the standard iron set; however, one will need to purchase other types of wedges too. These golf clubs have a high loft with a short shaft and come in handy for hitting the ball over the tree or removing the golf ball from the sand. The sand, gap, and lob are some popular sorts of wedges that can be bought separately. However, the beginners, usually only need the pitching edge. They can buy the additional variety as their level of play advances.
Putters
Every golfer needs putter in their set as it serves an essential purpose, i.e., pushing the ball in the hole when the player is on the green. The putter clubs are available in 3 different styles, including heel-toe, mallet, and traditional blade. Mallets are the recommended option for most beginners. Generally, standard putters are 32 to 36 inches long; however, one can get them customized based on their comfort.
Hybrids
Also called as utility clubs, hybrids are a comparatively a newer addition in professional and recreational golf. The hybrids combine the shaft of the irons and the head of the fairway wood. They are designed to replace the lower numbered irons that are difficult to play with. These clubs cover the same distances as irons but are easier to swing, making them ideal for beginners.
A seasoned player or rookie, it is important to know that the key to a good golf game is using the right club. At times, choosing a golf club can turn into a daunting task because of the extensive range of golf clubs that are available in the market. Several players, especially, beginners make the blunder of buying clubs that don’t agree with their swing mechanics or level of play. Therefore, before making a purchase, here are some essential factors one should scrutinize.
Golf club length
It is imperative for a player to get a golf club of the right length. Standard golf clubs are designed for men and women with an approximate height of 5 foot 10 inches. If players are taller or shorter than the stated height, then they will need to get their golf clubs customized. Likewise, physical strength also needs to be taken into consideration. So, individuals with short stature can opt for lighter golf clubs so that it doesn’t interfere with their swing power.
Grips
The grips are crucial for maintaining the player’s control over the golf club. Going for the wrong grips can impede one’s golf game. There are four types of grips to choose from, i.e., the standard grip, the under-sized grip, the mid-sized grip, and the over-sized grip. Moreover, they come in a variety of textures like smooth, coarse, and abrasive. To pick the best grips, one should consult a professional golf fitter.
Shaft material
The shaft of the golf club makes up for the majority of its weight. Typically, these shafts are created using graphite or steel. Graphite shafts are comparatively more expensive. However, they are lighter and render better distance with every swing. Moreover, their lightness makes it simpler for the player to swing. This feature could benefit people who significantly lack arm strength. Alternatively, steel is heavier and cheaper but makes a great option for individuals who have a good arm strength and need the additional weight to restrain their swings.
Accessories
While buying a golf club, one should ensure to buy some essential accessories like a golf bag, gloves, and shoes. Although it is optional to use gloves and golf shoes, these accessories can come in handy. The gloves can improve the grip on the golf club, and the shoes can prevent the player from slipping and falling on the course.